|Aaron Shinkle, a graduate student in the group of professor Charles Monroe, prepares a liquid battery test cell. Photos by Joseph Xu, College of Engineering Communications.|
So-called flow batteries could be the answer to storing solar, wind, and other renewable energy on the scale that power companies need, but it will take engineers and scientists to get them to that level.
“People say they’re putting a solar panel on their house,” said Charles Monroe, professor of chemical engineering. “They don’t say they’re putting a gigantic battery in their attic.”
But if homeowners want to get the most out of those solar panels, they had better install a means to store the energy they harvest. And that’s just the small version of the problem – as renewable energy sources integrate with the grid on a large scale, batteries fit for power stations are a crucial piece of the puzzle.
With current lithium-ion technology, batteries the size of semi-truck trailers can hold 500 kilowatt hours (kWh) – or enough to power about fifteen US houses for a day. Unfortunately, they degrade somewhat with each recharge and survive for only about a thousand recharges. In order to develop batteries that can hold as much energy as lithium-ion designs and also last for many years, Monroe’s team has joined forces with that of Levi Thompson, a fellow professor of chemical engineering.
They got flow
Also unlike traditional batteries, the available energy or storage capacity of a flow battery is limited only by the amount of fluid available to flow through its reactor. For instance, if you harvest wind energy with a battery connected to a turbine, you would have to replace a standalone battery the moment it was fully charged. But for a flow battery, raising its capacity is as simple as adding more fluid to a tank.
While these benefits are appealing, flow batteries have a long way to go before they can compete with lithium-ion designs. “Flow batteries are not as energy dense and cost more than lithium-ion batteries, but with further development, there’s the expectation that they can out-perform [lithium-ion batteries],” said Thompson. “We’ve only scratched the surface.”
More bang for your cubic foot
Most researchers use water in their flow batteries because it’s cheap, ecofriendly, and a great solvent. But it has a problem: it breaks apart when the difference between the positive and negative side of the reactor is as low as 1.2 volts (V). That limits the energy a flow battery can provide per electron.
Instead of water, the team is working with acetonitrile, a solvent often used to manufacture drugs. It can take voltages up to about 5 V. The voltage of the battery depends on the metal that is dissolved into solution. Vanadium can manage voltages up to 2.2 V, but the team found that chromium can do much better, with a voltage of 3.4 V.
Another way to increase the energy density is to use a metal that can donate multiple electrons. By releasing two electrons rather than one in a reaction, the metal essentially doubles the amount of energy it can provide. Both vanadium and chromium can donate two electrons.